|
|
|
Rapid
Remover is a non-toxic, water-soluble adhesive remover that breaks down
and removes adhesives in as little as sixty seconds!
Spray it on, wait a few minutes and easily wipe away residue adhesive
with a plastic squeegee and paper towel. Not only is does Rapid Remover
work fast, but it works without causing damage to most painted or bare
metal surfaces, glass, fiberglass, vinyl and painted surfaces.
Rvinyl always recommends you test a small inconspicuous area prior to
use.
What may have been a four-hour job (and a messy one at that) can now be
cut in half with an easy, clean and non-damaging removal. Gone are the
days of using dangerous and risky chemicals that often damaged painted
surfaces, and had numerous health hazards. Rapid Remover works. It’s
that simple.
Instructions:
1. Remove Decal: Use a heat gun, heat lamp or hair dryer to soften
the decal, then slowly pull the vinyl off the surface at a 45 degree
angle.
2. Apply Rapid Remover to the remaining glue or adhesive residue.
Let stand for at least 60 seconds, but no longer than 120 seconds.
3. Remove excess vinyl with a plastic squeegee.
4. Spray a paper towel with Rapid Remover, then use a paper towel to
wipe away remaining residue.
5. Rinse area with water or for new graphic applications rinse the area
with Rapid Tac or Rapid Tac II. |
|