|
| Carbon
Fiber R One Fender Kits by Rvinyl.com: |
What is this product?
Carbon Fiber R One Series Fender Kits have
a traditional carbon fiber printed pattern and are our most popular finish
for fender applications.
This is Rvinyl's widest Carbon Fiber Film available and is coated
with a semi-permanent pressure sensitive adhesive which allows for its
application on most smooth and non-porous surfaces. Because it is the widest
it is the most suitable film kit we offer for fender applications.
30" Wide Format Vinyl Sheets for your Fender or any other surface.
Traditional Printed Carbon Fiber Pattern.
Applies similarly to decal or sticker using a wet or dry application method.
Rvinyl Film carries a 3 year
warranty, designed to last up to five years.
Step by Step wrap kit
application instructions available online.
Genuine Rvinyl product.
Our most flexible carbon fiber film.
Can be heated molded to contours and curves.
What Carbon Fiber R One application tools do you recommend?
Rvinyl recommends the use of an application squeegee which will reduce air
bubbles during installation and aide in heat conforming Carbon Fiber R One Film. By
using a low friction sleeve, you will reduce the chance of scratching your
R One Film during application. Application solutions such as Rapid Clear
will remove any dirt or debris from your application surface and Rapid Tac will aide in
the wet application of our Carbon Fiber R One Film kits. We strongly recommend the use of these
products to achieve professional results.
Why don't you offer a wider kit?
Your car's fender is a difficult area to apply vinyl film to. It is wide
and a cumbersome application area, however by reducing the area to two
parallel sections, application becomes easier. The vinyl seam will be
almost invisible when properly applied.
What can Rvinyl Wrap Kits be applied to?
Your car's fender, fender, dashboard, gauges, fender accessories such as
navigation systems, amplifiers, wheels, mirrors, door handles, glass, cell
phones, laptops, fender plastic trim, metal parts and just about any
relatively non-porous surface.
Do they have a glossy finish?
Yes, it has a gloss finish. This is not a high gloss finish as in our
Carbon Fiber R Two and Carbon Fiber R Three series wrap kits.
Is the surface durable?
When applied correctly to the appropriate hard surface the film is very
durable, UV stable and scratch resistant.
Can it be applied to curved surfaces?
Carbon Fiber R One Kits can be applied to surfaces with extreme curvatures
such as fenders or fender parts. They can be applied using a heated application method.
This is an advanced installation procedure, but well worth the trouble.
Will it fade in the sun?
No, it is coated with a UV protective layer which will last up to three years
outdoors.
Can it be cleaned?
Yes, once applied and bonded to your surface you may clean it and polish it
with such things Armor All or any type of cleaning agent that is Acetate
free.
What are the films physical properties?
Thickness of film plus adhesive: .0042" (0.010668cm)
Application temperature: 50°F to 104°F (10°C - 40°C)
Rvinyl recommends an application temperature of 70-80°F (21° -26°)
End Use temperature after application: -5°F to 194°F (-20°C - 90°C)
What is the difference between Carbon Fiber R One, Two and Three Series
films?
Rvinyl R One film is our widest printed vinyl based film and designed to be applied
to curved or compounded surfaces. R Two and R Three series films are foil
based, have a different pattern and are designed to be applied to simple
curves, but generally flatter even surfaces. |
|