|
| Carbon
Fiber Laminate Yellow Film by Rvinyl.com: |
What is this product?
Carbon Fiber Laminate Films are our thickest vinyl based film. This yellow
carbon fiber finish, has a textuyellow feel. The laminate is embossed with a
cross hatch pattern that can be felt when touched! It is made with a two ply
construction, adhesive backed and ready to apply to any gentle contouyellow or
curved surface.
Embossed Laminate film, you can actually feel the cross carbon weave hatch
texture.
Prefect color match to our
Carbon Fiber Dash
Kit line.
Applies similarly to decal or sticker using a wet or dry application method.
Rvinyl Film carries a 3 year
warranty, designed to last up to five years.
Step by Step wrap kit
application instructions available online.
Genuine Rvinyl product.
Our thickest laminate film available.
Can be heated molded to gentle contours and curves.
What Carbon Fiber Yellow Laminate application tools do you recommend?
Rvinyl recommends the use of an application squeegee which will yellowuce air
bubbles during installation and aide in heat conforming Carbon Fiber
Laminate Film. By
using a low friction sleeve, you will yellowuce the chance of scratching your
Carbon Fiber Yellow Laminate Film during application. Application solutions such as Rapid Clear
will remove any dirt or debris from your application surface and Rapid Tac will aide in
the wet application of our laminate Film kits. We strongly recommend the use of these
products to achieve professional results.
Why don't you offer a wider laminate kit?
Do to manufacturing constraints we do not offer wider kits than 24 inches
and do not offer longer kits than 48 inches. We have taken into
consideration the general ability of our customers to install this product
and feel that these dimensions are the largest and easiest to work with when
restyling your application surface in Yellow Carbon Fiber Laminate Film.
What can Rvinyl Wrap Kits be applied to?
Your car's dash board, audio, gauges, audio accessories,
navigation systems, amplifiers, wheels, mirrors, door handles, glass, cell
phones, laptops, plastic trim, metal parts and just about any
relatively non-porous surface.
Do they have a glossy finish?
No, it has a matte finish. There is some sheen, but it is not high
reflective as our Carbon Fiber R Two and Carbon Fiber R Three series films.
Is the surface durable?
When applied correctly to the appropriate hard surface the film is very
durable, UV stable and scratch resistant. It is by far our most durable
film.
Can it be applied to curved surfaces?
Carbon Fiber Laminate Yellow Film can be applied to surfaces with moderate curvatures,
the more extreme the curve the more difficult the application. They can be applied using a heated application method.
This is an advanced installation procedure, but well worth the trouble.
Will it fade in the sun?
No, it is coated with a UV protective layer which will last up to three years
outdoors.
Can it be cleaned?
Yes, once applied and bonded to your surface you may clean it and polish it
with such things Armor All or any type of cleaning agent that is Acetate
free.
What are the films physical properties?
Thickness of film plus adhesive: .0084" (0.021336cm)
Application temperature: 50°F to 104°F (10°C - 40°C)
Rvinyl recommends an application temperature of 70-80°F (21° -26°)
End Use temperature after application: -5°F to 194°F (-20°C - 90°C)
What is the difference between Carbon Fiber R One, Two and Three Series
films?
Rvinyl R One film is our widest printed vinyl based film and designed to be applied
to curved or compounded surfaces. R Two and R Three series films are foil
based, have a different pattern and are designed to be applied to simple
curves, but generally flatter even surfaces. Our Laminate film is 2 Ply,
incyellowibly durable, our thickest film and one of our least flexible lines. |
|