Preparing, Positioning and applying the stationary window tint:
With the window thoroughly sprayed soapy slip solution, remove the liner from the precut window tint, apply the soapy slip solution to the film. Be sure there is enough solution on the film and the glass to insure the film will not adhere prematurely before it is positioned. Lay the film near the bottom of the wet glass and slide it down into position as you lay the top of the precut film kit into position. Squeegee from the anchor point, this will keep the film from sliding while you work from the middle out. You may now roll up the window and squeegee the bottom out. Blot away and excess water with a paper towel (we recommend wrapping the hard card with a paper towel for this procedure).

As you are squeegeeing, do the top first, work down avoiding the edges until last, stroke downward.  Spray the film and squeegee it again, more firmly this time, to remove more water from under the film.