Wrap Kit Product Installation Instruction by Rvinyl.com:

Rwraps Wrap Kit Installation Guideline Step 2: Film Application - For the top area, squeegee horizontally left to right, applying beyond your intended area of application well past the seam between the hood and fender. if necessary, lift the film and adjust.  We recommend squeeging the film one to two inches at a time to reduce the possibility of the film wrinkling. Rwraps Wrap Kit Installation Guideline Step 3: The Pull - To conform the film the lower half of your application area, pull the film out (away from the area) and down. Rwraps Wrap Kit Installation Guideline Step 4: Conforming the Film - Use your hand or squeegee to conform the film to the surface. Remember, these are advanced techniques and may not be necessary on simple application areas. Page: 1 2 3 4 5 6