Wrap Kit Product Installation Instruction by Rvinyl.com:

Rwraps Wrap Kit Installation Guideline Step 10: Conforming to the Curve - Heated film can be conformed significantly. In this case, we wrap the film around a 90 degree turn because it has been heated. The easiest way to achieve this is with your hands,  be sure the film is warm and not too hot to the touch prior to applying significant pressure as not to burn your hands. Rwraps Wrap Kit Installation Guideline Step 11:Preparing to Trim Film - We will pull the film over the application area and apply inward pressure to conform it in this case to the wheel well. Rwraps Wrap Kit Installation Guideline Step 12: Trimming - Using a razor, trim some of the excess of the film.  This will make it easier to work with and allow it to be heat conformed in the future. Page: 1 2 3 4 5 6 7