Wrap Kit Product Installation Instruction by Rvinyl.com:

Rwraps Wrap Kit Installation Guideline Step 13: Heat Conforming - Heated film "breaks" the memory of the film.  Once heated, you may "pull it over the application area.  Once it cools, it will "remember" its applied position. Rwraps Wrap Kit Installation Guideline Step 14:Compound Curves - Using your hands, conform the heated film so it "remembers" its position. Rwraps Wrap Kit Installation Guideline Step 15: Trimming - Using a razor, trim some of the excess of the film.  As this is the final trim, you may trim all the excess down to the visible edge. For this type of application, Rvinyl recommends using a Seal-It Pen to seal the edge of the film and promote lamination for years. Page: 1 2 3 4 5 6 7