Wrap Kit Product Installation Instruction by Rvinyl.com:

Rwraps Wrap Kit Installation Guideline Step 16: Heating In- After the trim, you may wish to heat the films edge carefully to "seal it" to the surface. Rwraps Wrap Kit Installation Guideline Step 17:Trimming The Edge - Using a razor, trim the excess film no longer needed along the edge of your application area. Use your fingers to conform this edge, a Seal-It Pen to protect it form the elements and repeat step 16 from final application. Rwraps Wrap Kit Installation Guideline Step 18: Trimming - Using a razor, trim some of the excess of the film.  As this is the final trim, you may trim all the excess down to the visible edge. For this type of application, Rvinyl recommends using a Seal-It Pen to seal the edge of the film and promote lamination for years. Page: 1 2 3 4 5 6 7