|
 |
|
What are graphicsR Racing
Stripes?
GraphicsR Racing Stripes are a universal trim-to-fit
customizable body graphic. They come in a three sections, two
sections are 72" in length and one section is 36" in length.
They can be applied to the hood, roof and bumpers of you car,
truck or SUV.
What
comes in a
graphicsR Racing Stripes Kit?
You will receive three racing stripes total. Two 72"
sections and one 36" section. The widths of the graphic vary
depending on the style. The widths and spacing are listed in the
diagram of the graphic.
Will this Racing Stripe fit my vehicle?
This is a universally sized graphic and can be applied to most
vehicles. Always measure your application areas prior to
purchasing this kit. We recommend using a tailor's tape
measure as it will take into considerations the curves of your
vehicle. If you don't have one, use a string and then measure
the portion of the string that represents the graphic with a
tape measure or ruler.
How do I install a
graphicsR Racing Stripes
Kit?
The easiest way to answer this questions is for you to watch our
installation video on this page. Installing racing stripes can be a difficult process.
> Installation difficulty depends on the ability of the
installer.
> Depends on whether the vehicle has complex curves,
protrusions or is compounded.
> Depends on if the proper installation tools and fluids are
used.
> Depends on whether the installer is familiar with a
wet application method.
What
graphicsR application
tools do you recommend?
All of them. Installation can be difficult and the tools we sell
help guarantee results.
> A squeegee will reduce air bubbles and aide in heat
conforming the graphic.
> Low friction sleeves prevent "squeegee scratches."
> Rapid Prep removes any dirt or debris from your painted
surface.
> Rapid Tac will aide in the wet application of our
vinyl graphic.
> Rapid Prep will act as a finishing agent and polish on all
graphicsR products.
> Seal-It Pens are used to seal the edges of all our
graphicsR product lines.
How much does it cost to have my kit installed?
These kits are designed for the DIY installer. We are here to help.
If you are planning to have your graphicsR product installed by a shop you will not generally save any money.
Installers generate their profit from
installation costs, not the cost of film. They prefer to work
with the film they regularly use and we recommend you go with
their preferred film.
Do you offer a warranty?
Yes. GraphicsR products offers a Standard Warranty film (3
years). These professional grade films are guaranteed to not
fade, peel, crack, bubble or change shade when installed
properly. The only exception to this is our Chrome and Brushed Aluminum films
which carry a 1 year warranty.
Are your Racing Stripes
Glossy?
Yes, the film has a gloss finish which will blend with your
vehicle's OEM finish, except for the case of Matte and Carbon
Fiber R24 series films which have a sheen, but have a matte
finish.
Will the paint not covered by my graphic fade?
By maintaining your car's paint with regular washing and waxing
there will be little discernable difference.
|
|