|
|
 |
What is a Fog Light Tint Kit?
Fog Light Tint kits are designed to
darken the shade of your Fog Light lenses, but not change the output
shade of your light. They come pre-cut in the shape of your light
ready to apply.
Pre-Cut Fog Light Tint is easier to apply than Fog Light film wraps or
spray tint.
CAD designed for OEM Factory Fog Light applications (not intended to fit
aftermarket lights).
Applies similarly to decal or sticker using a wet and heated application
method.
Carries a 3 year
warranty,
designed to last up to five years.
Step by Step
application instructions available online.
Genuine Rvinyl Rtint product, not a static cling kit it is adhesive
backed.
Sold in pairs for the driver and passenger side Fog Lights.
Can be removed with out damaging your Fog Lights.
The only Fog Light tint kit designed to be heat conformed to curved
lights!
|
|
|
How difficult is it to install
Pre-cut Fog Light Film Kits?
Although installing precut kits is can be significantly easier and less time
consuming than installing film by the roll, it can still be a difficult
process. Although many sites claim their kits are easy to install, we
recommend you review the installation procedures outlined to make sure
our product meets your needs. Installation difficulty depends on the
ability of the installer, the particular Fog Light being tinted and the
compound surface of the light as it will require heat
stretching for proper installation.
What is the difference between Tint and Protection Film?
Tint and Protection film are both designed to change the color of the
lens, without greatly changing the output color. Protection film
however is designed to protect your lights from small road debris, UV
damage, sand and weather. Tint film is 3 mil (.0042") thick and
protection film is 15 mil or (.021") thick. As protection film is
five times thicker, heat is required for proper installation.
What Fog Light Tint application
tools do you recommend?
Rvinyl recommends the use of an application squeegee which will reduce
air bubbles during installation and aide in heat conforming the light.
By using a low friction sleeve, you will reduce the chance of scratching
your Fog Light tint during application. Application solutions such as
Rapid Prep will remove any dirt or debris from your lights and Rapid Tac
will aide in the wet application of our tint kits and Rapid Clear will
act as a finishing agent and polish. We strongly recommend the use of
these products to achieve professional results.
How much does it cost to have my
Fog Lights professionally tinted?
The cost of tinting depends on the film being used and the vehicle being
applied to. In general, the cost is $90 - $120 for Fog Light tint installation
and even greater for protection film installation. If you are purchasing this kit and plan on
having a professional installer apply the tint, you will generally not
save money. Installers profit is derived from the labor, not the
film costs and it is in their best interest to have as many billable
labor hours as possible. These kits are designed for the do-it-yourself
minded individual, if you plan on having this kit installed
professionally we recommend you purchase their film and installation
service.
Do you offer a warranty?
Rvinyl offers a Standard Warranty of 3 years. These professional grade films are guaranteed to not
fade, peel, crack, bubble or turn purple when installed by a licensed
professional. Warranty protection is only applicable for professionally
installed tint / protection kits. Rvinyl.com will guarantee that the film will not
fade or change color, we can not extend any further warranties unless
this film is professionally installed.
What is the legal Fog Light tint shade for my state?
Clear Protection films are legal. Our
colored films may not be legal for street use on primary lighting.
Please check your state or local laws before application. Our colored
films do not produce a blue or red light when lit. All non-clear films
are intended for off-road show car use only.
Do you offer kits for my
headlights?
We do offer many popular car model pre-cut kits in our
headlight tint kits
section. |
|