What is this product?
Fog Light Smoke Wrap kits are designed to change the oem and aftermarket appearance of fog lights without significantly affecting the light output color.  Shades of smoke, blue and yellow enhance the look of you vehicle for a truly customized exterior.

How do I apply this product?
After applying the fog light smoke out tint wrap film, you simply trim the excess vinyl with a sharp blade or hobby knife (not included). What you have left is a customized exterior without the head aches and costs associated with painting or "smoking" the lights of your vehicle. Application squeegee and detailed installation instructions are included.  A wet and heat application method is required on large area applications.

How do I know which wrap size film to purchase?
Measure the surface area where the film is going to be applied. Take into consideration any bends or compound curves that may need the material to bend when wrapping. Then choose the most applicable size for your need. A Tailor's Tape works well when measuring for bulk film.

Do fog light smoke out kits protect my fog lamps?
No, they are not a thick film like our Rvinyl Protection Tint Kits.  They are designed to change the appearance of you fog lamps, but not protect them from road debris.

What are the Rvinyl tint ratings?
Dark Smoke Non-Protective Tint Film: 33% Light Transmission
Light Smoke Non-Protective Tint Film: 63% Light Transmission
Blue H.I.D. Non-Protective Tint Film: 35% Light Transmission
Blue Ice Non-Protective Tint Ice Film: 56% Light Transmission
Yellow Saffron Non-Protective Tint Film: 86% Light Transmission
Yellow Brimstone Non-Protective Tint Film: 89% Light Transmission
Lime Non-Protective Tint Film: 70% Light Transmission

Non-Protective Tint Film Properties
> Thickness of tint plus adhesive: .0042" (0.010668cm)
> Application temperature: 50F to 104F (10C - 40C)
> Rvinyl recommends an application temperature of 70-80F (21 -26)
> End Use temperature after application: -35F to 300F (-37.2C - 148.8C)