Get the Look of Brushed Aluminum with 1080 Series Film

When you want the look of genuine Brushed Aluminum, you want 3M™ 1080 Series vinyl wraps. This 3.5 mil thick Brushed Aluminum wrap film lets you easily wrap anything with a hard, non-porous surface. Simply remove the liner, apply pressure and heat from a heat gun or hairdryer. Its invisible, micro-channels ensure that no air is trapped between your wrap and substrate so you get bubble-free results each and every time. 

3M™ Brushed Aluminum Wraps for Enthusiasts

3M™ Brushed Aluminum vinyl wraps are made just for you, the DIY enthusiast. In other words, there's no need for any special tools or caustic fluids when you use 1080 Series films. Just follow the included instructions and you'll be ready to apply this pressure-sensitive, heat-activated vinyl in no time at all. Simply clean the surface, add some heat with a hair dryer and squeegee it on. Buy it by the foot and enjoy seamless results because this vinyl comes standard in sixty inch widths.

1080 Series Brushed Vinyl Specifications

• Color: Aluminum
• Finish: Brushed  
• Installation Temperature Range: 75°F to 80°F (24°C to 32°C)
• End Use Temperature Range: -65°F to 225°F (-60°C to 107°C)
• Adhesives: Pressure-activated with air-release channels
• Recommended Uses: Automotive, Architectural, Marine (above static water-line), Signage
• Conformability: Flat, compound, convex and concave curves
• Thickness: 3.5 mil
• Application Type: Dry

Share and Save

Get the look you want and then get paid for it. All you have to do is wrap something with this 3M™ Brushed Aluminum vinyl wrap, write up a short review of your experience and then snap five or six high-quality pics of your job. Email or upload them through our site and we'll send you a credit rebate. We'll post your pics on our website and make a video montage for our YouTube channel so you get a little bit of fame too. So, don't just sit there, get to wrapping now!