If you want to reduce your waste when you're tinting front windows and windshield visors, our full 100 foot long, 20 inch wide rolls of NR Pro Series window tint films are just what the doctor ordered.
Be prepared for your customers when you buy a full one hundred foot by 40 inch roll of this Avery Dennison NR Pro Series Window Tint Film. Tint up to 10 full vehicles with this great film.
If you don't have the cash or a good reason to buy a 100 foot roll of NR Pro Series Window Tint Film then you'll love the fact that we offer the ability to buy pre-sized sheets of this film. Buy a sheet in all available VLTs as small as 20 by 24 inches or as large as 40 inches by ten feet. Get the shade you want and buy only what you need.
Price: $9.99 - $99.99
When you're looking to add cool and comfort to your ride, you're looking for Avery Dennison NR Pro automotive window films — even if you don't know it yet. Specially formulated for keeping car interiors safer from the harmful sun, this NR Pro Series tint is a dyed window film is a multi-ply film, made using nano technology to ensure colorfastness and performance. NR Pro Window Film is th highest quality dyed window tint made by Avery Dennison and is the most
popular brand and series of window tint we carry, even if it isn't the least expensive.
When shopping for your window tint film, you will have the option of buying pre-cut sheets or whole, uncut sheets. Pre-cut sheets are a convenient way to save time in the installation process. With advanced software and precision cutting machines, pre-cut tint film will give you a great finished product with half the work.
If you are a perfectionist with a steady hand, whole tint sheets are the only way to ensure a truly custom job - custom to your vehicle because you did the cutting based on the measurements made on your own vehicle. This is a difficult trade-off, as the tools, skill and patience required to complete the job from whole sheets aren't always accessible to the average DIY-er.
Window tint films are classified by the amount of light they allow in, by percentage. A 5% tint is much darker - and almost universally illegal on passenger vehicles - than a 50% tint. Factory tints on rear windows tend to be in the 50-70% range, so buying something on the lighter side might not actually accomplish what you are going for.
State laws regarding window tint are quite clear, and law enforcement officers don't always have a sense of humor about illegal tint. Know the laws governing car modifications in your area. If you are going to exceed the legal darkness level, know the potential consequences of your decisions.
Many pre-cut kits will also claim to be pre-shrunk, but don't be fooled. To get the most professional-looking results possible, you must shrink the film yourself. Pre-cut kits are cut from databases, rather than from the measurements taken on the actual vehicle. This DIY project will require a lot of work on your part, and it will never be a 100% perfect fit. Pre-shrinking the tint film before it touches your window will put you even further away from that 100% perfect fit.
Luckily, pre-cut kits can give you professional-looking results, but they depend on you shrinking the tint film once it has been applied to your vehicle. For more information on the shrinking process, see our guide to heat-shrinking window tint with a wet method.