Want that custom euro look? Then look no further than VHT's Nite-Shade red translucent smoke spray tint finish. Design to match the existing red color found on your Universal 's tail lights, these give you a subtle customized look when smoking your lights is not an option.

Manufacturer Part Number: SP888
There are no reviews yet.
Availability: In Stock
Ships within 1 - 2 Business Days
In Stock
PRICE: $24.99

    VHT® Nite-Shades (Red) FAQ

    VHT® Nite-Shades (Red) Features

    • Nite-shades are a transparent red tail light lens coating.
    • Light lens coating for creating custom European styling.
    • Customize factory or aftermarket lights.
    • Recommended for off-road show car use only.
    • WARNING once applied to plastic lens SP888 is not able to be satisfactorily removed.

    Nite-Shades Translucent Red is a transparent red tail light lens coating for creating custom European styling. When applied to tail lights, fog lights, or turn indicators, VHT Nite-Shades appears red until they are lit, then the natural color appears. Recommended for off-road use only. Easy to follow 4-Step application instructions.

    This aerosol red-out spray is the ideal alternative to wrapping your lenses in red smoke vinyl film because it can be applied to lights with even the most extreme curves, concavities and irregular surfaces. Customize your taillights or headlights and get an OEM-look every time with this great product.

    Step 1: Removing the tail light, fog light or turn signal is recommended for proper application. Prepare the surface by removing any grease, oil, wax or road tar. For best results wipe down with a grease and wax remover and a clean cloth to clean the surface.

    Step 2: Mask off surrounding areas to protect from over spray use between temperatures of 60°F (16°C) and 95°F (35°C) and when humidity is less than 60%.

    Step 3: Shake can vigorously for one full minute after mixing ball moves freely. Shake can for 10 seconds after each minute of use.

    Step 4: Apply just one light coat or just enough to change the lens color. DO NOT exceed more than three coats or light may not show through. Dries to the touch in one hour. Can be handled in three hours. Cures completely in twenty four hours.

    Part Numbers: SP888