Rwraps™ Wood Grain - Sapele Vinyl Features
- Rwraps 914 Wood Grain Print Series Pattern
- Pressure-activated film with air-release adhesives
- Dual cast film won't deform or discolor
- Choose from Gloss, Matte or No Lamination
Wood Grain Vinyl Wraps
When you want the naturalistic look of wood grain print but don't
want to contribute to deforestation then you will want our Rwraps™
Wood Grain Sapele wraps. These wraps are
perfect for usage on your car, truck, or SUV's exterior as well as on
its interior trim this wrapping film is ideally suited for use on any
hard, non-porous surface. And, if you've been looking for a craft film
to use in lettering or decals, you've found it! This Wood Grain Sapele
patterned film works like a charm in your vinyl cutter or Cricut
machine. In fact, it works so well that we use it to make Rdash® dash kits. Check out some of the most popular applications for our wrapping
- Jet Skis
- Golf Carts
- and more...
From the Forest to the Urban Jungle
Whether you live in cabin in the forest or New York, the semi-gloss look of our
Animal Print Wood Grain vinyl will always be in style. Made just for you,
the DIY installer, this Rwraps™ Wood Grain vinyl is sold by the foot in
lengths of up to ten yards and in three convenient widths (12, 24, or
59-inches) so you never end up with more than you need. Featuring
air-drain adhesives, you get bubble-free results each and every time
you use it. No fooling around with harsh chemicals, messy slip
solutions, and sticky glues. Just clean the surface, heat the film,
squeegee it on, and trim away the excess. Fast, simple, and painless -
just the way we like it!
Measuring Your Wood Grain Sapele Wrap
As you may have noticed above, we have taken the time to show you the scale of the pattern of this film. The image with the man (or woman, we're not sexist) shows how the
Wood Grain print looks in a 59" (approximately 5 feet) by 72" (6 feet) sheet. The image is to scale so it should be helpful in determining how the print will look on your car, truck, motorcycle, or anything else you decide to wrap. Please note, however, that the entire pattern is not visible here (in other words, the repeating
Orion's Belt pattern is much larger than 5 by 6 feet so you won't necessarily get what is shown).
The 12 by 12-inch tile shows you how you can expect the wrap to look on smaller applications like dSapele wraps or skateboards. Again, not every one foot square section will have this exact part of the pattern but it should give you a general idea of what to expect.
Shiny or Subtle, It's Your Choice
All of our Rwraps™ 914 Series films come with a gloss laminate as the default choice. But, since we're all about aesthetic customization, you get the final say. Choose from Gloss, Matte or even No Laminate on your
Please note that lamination increases the life of your wrap (this applies equally to gloss or matte laminates) and should always be selected for outdoor applications. Unlaminated wraps are only recommended for low traffic, indoor use.
Made for Makers
The popularity of our Wood Grain film doesn't appear to be waning
and you guys are constantly coming up with novel uses for them. These wraps were originally designed with vehicles in mind but you can use
them on any hard, non-porous surface you can imagine. No need for messy primers
or additional fluids, simply clean the surface of whatever you want to wrap and
apply. Use a razor to cut away any excess film and you're done. What could be
easier or better looking?
Get Free Swag by Customizing
If you enjoy freebies, you'll love this. Since there's no better
advertising than a satisfied customer, we're excited to offer free
swag to you. We'll then post your pics to our site and create a video
montage for our YouTube channel. Just write up a quick review of your
wrapping experience and send in five or six high-quality, multiple
angle shots of your wrap. What
could be better? So, hurry up and pick up a roll today!