 |





|
What is Rshield paint
Protection
Bumper Strips?
Rshield is a universal trim-to-fit strip designed to
protect your vehicle's bumpers from UV damage, light scratches, weather
elements and small road debris. Each kit includes (2)
strips 80" x 6" in size that can be applied just about anywhere
on the exterior of your vehicle. Rshield Lit it is a lighter or thinner
version (.0042" thick) film designed to be installed by the
average DIY installer. If you require about our Rshield
Professional Grade Film (.021" thick) please contact us.
What
comes in a Rshield Universal Bumper Protection Strip Kit?
You will receive two Rshield strips. They measure approximately
80" x 6" in size. You will still need to trim the outer edges,
areas around the grill and the license plate on some models.
How do I install Rshield Paint Protection Film?
The easiest way to answer this questions is for you to watch our
installation video on this page. Although it showcases a precut
paint protection film application, the general principles are
the same. Installing Rshield Paint
protection film can be a difficult process.
> Installation difficulty depends on the ability of the
installer.
> Depends on whether the vehicle has complex curves,
protrusions or is compounded.
> Depends on if the proper installation tools and fluids are
used.
> Depends on whether the installer is familiar with heat
stretching film.
What Rshield application
tools do you recommend?
All of them. Installation can be difficult and the tools we sell
help guarantee results.
> A squeegee will reduce air bubbles and aide in heat
conforming the Paint Protection film.
> Low friction sleeves prevent "squeegee scratches."
> Rapid Prep removes any dirt or debris from your painted
surface.
> Rapid Tac will aide in the wet application of our Rshield
Paint protection film.
> Rapid Paint will act as a finishing agent and polish on all
Rwraps.
> Seal-It Pens are used to seal the edges of all our
protection films.
How does Rshield compare to Venture Shield, 3M or Lamin-x?
Rshield Lite is a thinner film designed to be applied by the
average DIY minded individual. This is the series of film
offered in this auction. Venture Shield, 3M Clear Bra and
Lamin-X products are great professional grade films, they are
much thicker, much more expensive and generally require
professional installation. Rshield Professional is
comparable to those films.
What is the difference between Universal and Pre-Cut kits you
offer?
This is a universal trim-to-fit kit. It is cut in
a general shape of most vehicle's
bumpers (80" x 6" rectangle). Two strips are
included to make sure you complete this DIY project. We do
offer Pre-Cut kits which are model and year specific.
How difficult is it to
install Rshield Universal Products?
Installing trim-to-fit
Rshield can be significantly easier and less time consuming
than installing paint protection film by the roll, it can still be a
difficult process.
> Installation difficulty depends on the ability of the
installer.
> If the application area has complex curves.
> If the proper installation tools and fluids are used.
> If the installer is familiar with heat shrinking film.
How much does it cost to have my kit installed?
These kits are designed for the DIY installer. We offer
discounted replacements if any issues arise during installation,
just contact us. We are here to help.
If you are planning to have Rshield installed by a shop you will not generally save any money.
Installers generate their profit from
installation costs, not the cost of film. They prefer to work
with the film they regularly use and we recommend you go with
their preferred film.
Do you offer a warranty?
Rshield offers a Standard Warranty film (3
years). These professional grade films are guaranteed to not
fade, peel, crack, bubble or turn yellow when installed
properly.
Is Rshield Glossy?
Yes, the film has a high gloss finish which will blend with your
vehicle's OEM finish.
Will the paint not protected by Rshield fade?
By maintaining your car's paint with regular washing and waxing
there will be little discernable difference.
My vehicle has just been repainted, can I install Rshield?
We recommend you speak with the auto body shop who painted your
vehicle. In general, once you can wax your vehicle you can
apply Rvinyl Rshield.
Can Rshield be removed?
Yes, when applied properly on fully "cured" paint it can be
removed without damaging your vehicle's surface.
Can Rshield be painted or clear coated?
No, the UV stable film is not formulated to be clear coated or
painted.
|
 |
|
|