Thank you for asking a question! You should recieve an answer within 48 hours.
Thank you! Your answer to this question has been submitted successfully.
Loading...
In Stock
Retail: $1.49

Starting at $0.99

review-star review-star review-star review-star review-star
(5.00 / 5) Write a review

2080 Series Gloss Flame Red Vinyl Films are the most advanced wrapping vinyl's in the marketplace. Made to replace 1080 wraps, 2080 Vinyl Wraps are designed to be far more stretchable than their forerunners while requiring less heat. And, because they are designed to take the place of 1080 Gloss Flame Red, you can rest assured to get the closest color match possible if you've already wrapped a car, truck or any other vehicle. Yet another improvement you receive with this wrap is a Clear Protective Layer which safeguards your wrap during set up so you get great outcomes with no scratches or scuffs. Ultimately, all 2080 Gloss Vinyl Wrap films are made using Comply™ and Controltac™ adhesives so you get easy repositionability and bubble-free results.

Availability: Availability: In Stock
Ships within 1 - 3 Business Days
Film Size:

Application Razor:

Squeegee:

Application Fluid:

Edge Seal-It Pen:

Ceramic Coating:


Update price

Starting at $0.99

Availability: In Stock
Ships within 1 - 3 Business Days

2080 Series Gloss Flame Red Vinyl Films are the most advanced wrapping vinyl's in the marketplace. Made to replace 1080 wraps, 2080 Vinyl Wraps are designed to be far more stretchable than their forerunners while requiring less heat. And, because they are designed to take the place of 1080 Gloss Flame Red, you can rest assured to get the closest color match possible if you've already wrapped a car, truck or any other vehicle. Yet another improvement you receive with this wrap is a Clear Protective Layer which safeguards your wrap during set up so you get great outcomes with no scratches or scuffs. Ultimately, all 2080 Gloss Vinyl Wrap films are made using Comply™ and Controltac™ adhesives so you get easy repositionability and bubble-free results.

Availability: In Stock
Ships within 1 - 3 Business Days

3M™ 2080 Gloss Flame Red Vinyl Wrap 

  • Flame Red with a high-gloss shine
  • Air-release, Comply™ adhesives
  • Dual cast, 3.5 mil thick vinyl film
  • 7 Year Life Span
  • Sixty inches wide film for seamless wraps

2080 Flame Red Vinyl Wrap

3M™ 2080 Series Gloss Flame Red vinyl wrap films give you a look that you can install on anything and goes on as smooth as butter. 2080 Gloss Flame Red is a high-gloss film with a fiery red color. Apply it on any of the hard, non-porous of your ride from pillars, to fenders to hoods and more. Turn heads and grab attention when you use this premium quality, 3.5 mil thick film with Controltac™ technology that allows you to snap up, re-tack and reposition this film during installation. Oh, and did we mention it features air-release technology too? That's right, non bubbles for you!

Gloss Flame Red Vinyl Made for You

3M™ Gloss Flame Red vinyl wraps are made just for you, the DIY installer or enthusiast. No need for any special tools or noxious chemical fluids when you use 2080 Series films. Just follow the instructions that come with your order and you'll be ready to apply this pressure-sensitive, heat-activated vinyl in no time at all. Just clean the surface, add some heat with a hair dryer and squeegee it on. Buy it by the foot and enjoy seamless results because this vinyl comes standard in sixty inch widths. Use it as a wrap, for crafting or even in your Cricut vinyl plotter-cutter!

2080 Series Gloss Red Specifications

  • Color: Red
  • Finish: Gloss  
  • Installation Temperature Range: +61°F (+16°C) minimum (air and substrate)
  • End Use Temperature Range: -6F to 225°F (-60°C to 107°C)
  • Adhesives: Pressure-activated with air-release channels
  • Substrate Types: Aluminum, paint
  • Recommended Uses: Automotive, Architectural, Marine (above static water-line), Signage
  • Conformability: Flat, compound, convex and concave curves
  • Thickness: 3.5 mil
  • Application Type: Dry


Save When You Share

We want to share a secret with you: not only are you guys our customers but you're our best advertisers too! That's why we've been offering our store credit rebate for over a decade. Interested? All you have to do is submit 5 to 6 high-quality photos of your 3M™ Gloss Flame Red installed in your vehicle or as part of your crafting project, write up a brief review and send it all in to us. Within a few days we'll process your submissions and issue you a credit rebate! So, what are you waiting for? Pick up a roll today start turning heads!

  • Universal Fitment

Watch & Learn

  • How Much Film Do You Need? https://www.youtube.com/embed/Bpz8bDHTyF0
  • How To Wrap Your Hood https://www.youtube.com/embed/rwP8wVlvqLQ
  • How to Wrap Your Fenders https://www.youtube.com/embed/W_l4DtsphfM
  • How to Wrap an ATV https://www.youtube.com/embed/HWNtseFslqA

Reviews

5.00 | 1 Reviews

Reviews | 1 Reviews

Avg Rating
5.00
Out of 5
5 Stars
100%
4 Stars
0%
3 Stars
0%
2 Stars
0%
1 Stars
0%

by 5.00

review-star review-star review-star review-star review-star
Honestly this is the best quality wrap. No issues what so ever.

Questions about this product? Ask us!

Number of questions: 0

0