-
Starting at$99.99Unit price /Unavailable -
Aluminum Dash Kits
Give your vehicle's interior a clean, modern metallic look with brushed aluminum dash kits designed for your specific year, make, and model.
Brushed Aluminum Interior Style
Aluminum dash kits deliver a modern metallic appearance that gives any vehicle interior a refined, purposeful look. These kits are not made from real aluminum — they are precision-cut overlay pieces finished to replicate the look of brushed or machined metal, giving you the aesthetic without the weight or cost of actual metal fabrication.
Available for cars, trucks, and SUVs, aluminum-style dash kits cover the dashboard, center console, door trim, and accent panels in a cohesive metallic finish that pairs well with dark interiors, gray upholstery, and factory black trim.
Why Choose Aluminum Dash Kits?
Aluminum dash kits strike a balance between sporty and refined — they add visual interest without the flashiness of chrome or the heaviness of wood grain. The brushed metallic finish works naturally with black, charcoal, and gray interiors, making it one of the most versatile interior upgrade options available.
For trucks, performance cars, and daily drivers alike, aluminum-style trim gives the cabin a modern, intentional look that feels like a factory upgrade rather than an aftermarket add-on.
Common Aluminum Dash Kit Areas
A complete aluminum dash kit typically covers every visible interior accent surface. The result is a cohesive metallic finish across the entire cabin — not just a single panel.
Dashboard Trim
Main dash panels, instrument cluster surrounds, and upper dash accents that define the front-cabin character.
Center Console
Shifter surrounds, armrest trim, and lower console panels that tie the aluminum look together from front to rear.
Door Panel Trim
Door inserts, pull handle surrounds, and window switch panels that extend the metallic accent across all four doors.
Radio & HVAC Bezel
Infotainment surround and climate control trim pieces that frame the center stack with a clean brushed finish.
Shifter Surround
Automatic and manual shifter surrounds that add a premium metallic touch to the most-used area of the interior.
Accent Panels
Glove box trim, pillar accents, and additional decorative panels that complete the full interior upgrade.
Aluminum vs. Carbon Fiber vs. Wood
Each dash kit finish creates a different interior character. Use the comparison below to choose the right style for your vehicle and build goals.
| Finish | Best Look | Best For |
|---|---|---|
| Aluminum | Modern metallic — clean, industrial, refined | OEM-style interiors, trucks, daily drivers |
| Carbon Fiber | Sporty performance — woven texture, technical | Tuner builds, performance cars, racing-inspired cabins |
| Wood Grain | Classic luxury — warm, traditional, upmarket | Luxury sedans, older vehicles, classic car restorations |
Related Dash Kit Collections
Explore other finish categories and interior trim options in the Rvinyl dash kit catalog.
All Dash Kits
Browse the full dash kit catalog by vehicle make and model across all available finishes.
Custom Dash Kits
Vehicle-specific precut interior trim kits for a precise, factory-fit installation.
Carbon Fiber Dash Kits
Performance-inspired woven carbon fiber trim for sporty and tuner-style interiors.
Wood Dash Kits
Classic burl wood and wood grain interior trim for luxury and traditional styling.
Chrome Dash Kits
High-gloss chrome interior trim for a bold, reflective accent finish.
Vinyl Wraps
Broad catalog of wrap films for exterior and interior custom projects.
DIY Aluminum Dash Kit Tips
Aluminum dash kits use a peel-and-stick installation method that makes them accessible for first-time installers. The key to a clean result is surface preparation and dry fitting each piece before committing to the final position.
Remove any interior protectants, silicone sprays, or polish residue from the factory trim before installing. These products prevent the adhesive from bonding properly and can cause pieces to lift at the edges over time. Wipe all surfaces with isopropyl alcohol and allow them to dry completely before starting.
Dry fit each piece first to confirm alignment, then apply in warm conditions to allow the adhesive to bond fully. Press edges firmly — especially around curves and corners — and avoid cleaning the trim for at least 24 hours after installation to let the adhesive cure.
Aluminum Dash Kits FAQ
Are aluminum dash kits made of real aluminum?
No. Aluminum dash kits are precision-cut overlay pieces finished to replicate the look of brushed or machined aluminum. They are lightweight, adhesive-backed trim pieces — not actual metal fabrication. This makes them easier to install and significantly less expensive than real metal interior trim.
What is a brushed aluminum dash kit?
A brushed aluminum dash kit is a set of vehicle-specific interior trim pieces finished with a directional brushed metallic texture. The brushed pattern gives the surface a refined, industrial appearance that differs from the high-gloss reflectivity of chrome and the woven texture of carbon fiber.
Can I install an aluminum dash kit myself?
Yes. Aluminum dash kits use a peel-and-stick installation method that does not require tools. Each piece is cut to fit specific factory trim surfaces. Clean the surface with isopropyl alcohol, dry fit the piece for alignment, then peel and press into place. Most kits can be installed in an afternoon.
What interiors match aluminum trim?
Aluminum dash kits work best with black, charcoal, and dark gray interiors. The metallic finish provides strong visual contrast against dark upholstery and factory black plastic trim. They also complement two-tone interiors and vehicles with silver or gray exterior paint.
Is aluminum dash trim removable?
Yes. Aluminum dash kits use adhesive-backed overlays that can be removed by carefully lifting an edge and peeling the piece away. Using a heat gun or hair dryer to warm the adhesive makes removal easier and reduces the risk of damaging the factory trim underneath.
Is aluminum better than carbon fiber for dash kits?
Neither finish is universally better — the right choice depends on the interior style you want. Aluminum is cleaner and more refined, making it a good fit for OEM-style upgrades and truck interiors. Carbon fiber is more aggressive and performance-oriented, making it a better match for tuner builds and sports cars. Both are available as vehicle-specific precut kits.
Shop Aluminum Dash Kits
Find brushed aluminum and metallic interior trim kits for your specific vehicle. Browse by make and model to see all available finish options.
Think your dash can’t look better? Think again.
Ready to upgrade your interior but not sure which dash kit is the perfect fit? 🎯Drop your email below, and we’ll help you choose the ideal style, finish, and fit for your vehicle — whether you’re after carbon fiber, woodgrain, or custom color. Get expert recommendations and exclusive offers straight to your inbox!