Avery Dennison™ Honda Civic 1992-1995 NR Nano Ceramic IR Precut Window Tint (Sedan)

Excelente producto.

siempre compro aqui

I read online that using pre cut tint wouldn’t give you the same quality as cutting it in place. This is completely wrong. I ordered 35% pre cut nano ceramic for the front two windows of a 2023 Chevy Tahoe and the fit is absolutely perfect. So much easier than cutting yourself. So far the color looks good but I won’t be able to tell for sure until I can get the truck outside ( it’s raining).

great fit, quality apears good! Quality of the window tint is good for the money,

It is very difficult to install. I used a heat gun to stretch the film to the size of my glass. Even if the film is burned out, I can't get the size of my glass. There are a lot of bubbles installed on the glass.

The tint came with wrinkles in it, wasnt able to get them out when installing.

I chose 5 stars on all of the above because this is a truly nice quality tint. Installation is tricky if you don’t know what you’re doing, so for me I messed up on 2/9 windows with a few wrinkles hear and there. The tint came with plenty of stickers to hold it without getting your finger prints on the tint. Overall, another great experience with rvinyl!

Five stars for the pre-cut side windows on my 2007 Honda Accord. One star for the rear windshield. The installation kit squeegee is not adequate to reach the bottom. After over an hour I abandoned hope and ripped it off.

Good quality product. My SUV feels considerably cooler. It does the job great. When I received my product, it had a crinkle in the middle of the roll which wasn’t ideal. Luckily it didn’t show too much after installation. There’s no substitute for actually doing it though. I watched a ton of videos and felt that I understood the concept pretty well, but those dang fingers. No matter how much I thought I was preshrinking, fingers still popped up after installation. I think I did and ok job, but I just wish it was more or less perfect since it’s kind of permanent. The edges were a challenge for whatever reason. If I had to do it again, I’d probably be a little better. Worth trying if you’re a DIYer.

Great product, perfect fit. Take your time follow the instructions and you’ll have a first rate job for a fraction of the price of a professional install.

Easy installation and accurate cut!!

Would recommend to anyone who knows what there doing seems to have a medium/strong ahisive comes with pull tab stickers to pull the film apart dose need to be shrunk on curved corners on the outside of the window i give this product a 9 out of a ten.

Impossible to tint back glass with the squeegee provided in the kit for my model. Can’t reach into the bottom edge to press tint to glass

Installation wasn't too bad, was my first time, it's not perfect by any means. But one of my window sheets was folded on arrival. Looks like it happened during packaging. Installed anyway.

Rvinyl shipped out the package fairly quickly, but USPS kept the package in the Metro Distribution center for almost 2 weeks. So that sucked. The tint was packaged well, and it seems like it’s really good quality. The installation went smooth, had to shrink it in a few places but it wasn’t horrible. Overall it turned out really nice and I’m extremely pleased with how it looks.

I was very excited to get this on my truck, but when I opened the package I was a little saddened, some of the edges of the tints were wrinkled and creased. I thought about returning it but didn't want to wait another 2-3 weeks for another set to arrive so I went ahead and installed them anyway. All went well except for one window where I couldn't get the wrinkles and creases out, but oh well...to late now. Overall I'm happy with the look and the product.

I was very excited to get this on my truck, but when I opened the package I was a little saddened, some of the edges of the tints were wrinkled and creased. I thought about returning it but didn't want to wait another 2-3 weeks for another set to arrive so I went ahead and installed them anyway. All went well except for one window where I couldn't get the wrinkles and creases out, but oh well...to late now. Overall I'm happy with the look and the product.

I was very excited to get this on my truck, but when I opened the package I was a little saddened, some of the edges of the tints were wrinkled and creased. I thought about returning it but didn't want to wait another 2-3 weeks for another set to arrive so I went ahead and installed them anyway. All went well except for one window where I couldn't get the wrinkles and creases out, but oh well...to late now. Overall I'm happy with the look and the product.

I was very excited to get this on my truck, but when I opened the package I was a little saddened, some of the edges of the tints were wrinkled and creased. I thought about returning it but didn't want to wait another 2-3 weeks for another set to arrive so I went ahead and installed them anyway. All went well except for one window where I couldn't get the wrinkles and creases out, but oh well...to late now. Overall I'm happy with the look and the product.

great product looks good only reason I went with 4 stars is I spent more time tring to separate the backing off the tint then I did actually installing it would definitely purchase again excellent fit

Great quality and arrived quickly

All the windows were cut out correctly and install was great. I had messed up back window because of the concave of window. I did not know to stretch the tent before installing for back windshield.

The holes for the rear windshield werent perfect. Easy fix just had to cut out new holes, not sure if my glass is OEM or if its been been replaced, that could contribute. Application was difficult since it was my first time. Size was mostly perfect. Again, could be aftermarketglass. Great tint.

Tint came well packaged and perfectly cut. Will continue to support RVinyl for alll my tinting needs for sure.

This film isn’t of very good quality, the service was good though.

Already installed on my BMW x7. Can be installed with the correct tools required (From Rvinyl).

I bit of experience is needed, but after 2 tries, could be done. Thank you.