Restyle your spoiler wings with premium quality 3M&trade Spoiler Wraps! Our wing wraps are cut from 60-inch wide rolls of premium quality film —the exact same material used in vinyl wrap shops on a daily basis. To properly apply the vinyl we recommend ordering an Avery Dennison® felt edge squeegee for quick and no-scuff install. Be sure you measure twice and buy once since we don’t offer...
Our Avery Dennison® SW900 Spoiler Wraps are made from the same material used for complete vehicle wraps. Choose from dozens of different colors and finishes such as Carbon Fiber, Brushed Metals, Satin, Gloss and more. All of our SW900 Spoiler Wing Wraps feature air-release channels for no bubble installation and can be heat-stretched to form to all of the curves and contours of the spoiler....
Emulate the look of a carbon fiber spoiler with an ORACAL® Spoiler WIng Wrap that you can install in no time flat. When choosing, be sure you buy a wrap that is slightly than your spoiler's total area to give you a margin of error while positioning and applying the vinyl. Please note that we cannot give refunds for purchasing an incorrect size so measure twice and buy once. And, as soon as...
If you've got an aftermarket spoiler or swings it's likely that they have
come to you in primer gray. Naturally, you don't want to leave them like that
which is where spoiler
wraps come in: made from sheets of vinyl premium quality wrapping film, you can
change the color and style of your spoiler wings in no time. Our DIY Spoiler Wrap films allow you to change your ride's appearance in just minutes or hours
instead of the days it would take to be painted in a shop. And, the fact that a
Spoiler Wrap is made from semi-permanent vinyl films means that you can remove
the wrap at your leisure and return the vehicle back to its original condition
if it came with stock wings.
If you have your Spoiler wrapped by professionals you can expect your ride to be
in the shop and out of commission for a day. If you go the DIY route
and wrap it,
you should schedule one to four hours and have a friend on hand to help.
You can expect your Spoiler wrap to last 5 to 7 years in general.
While a having a Spoiler wrap installed by a shop can cost as much as $300 per
have found that customers usually pay a fraction of that when they purchase our
kits and do it themselves.
Although we covered this above, we offer the following brands and series of
vinyl Spoiler wraps:
It's important to note that our Spoiler Wraps
are only suitable for application to factory-finished paint. They are not intended for aftermarket-finished paint as this will not have been cured to the same level as
factory paint jobs. Also, when choosing your
Spoiler Wrap, carefully measure the area or component to be wrapped and select the appropriate amount of material needed, remembering to factor in an overhang that will be trimmed after application.
Our Spoiler Wrap films are made for use it right out of the box — there's no
need to print or apply an overlaminate. Since they're manufactured with
color layers for dimensional stability and durability, you can depend on them
not to discolor or deform even around the craziest of curves. Enjoy the
convenience and quality of our pro-grade, DIY ready films and get to wrapping.