|
| Dark
Smoke ATV Tint Film
by Rvinyl.com: |
What is Dark Smoke Rtint product?
Dark Smoke ATV Tint Film kits are designed to change the color of your headlights,
tail lights or even turn signals
to a Dark Smoke shade, but not change the output color of your lights.
They come in a universal size measuring 24 inches wide by lengths up to 120
inches.
ATV Tint Film kits can be applied to any headlight, tail light or
turn signal.
Designed for OEM and After-Market Lights.
Applies similarly to decal or sticker using a wet application method.
Carries a 3 year
warranty, designed to last up to five years.
Step by Step
application instructions available online.
Genuine Rvinyl product, not a static cling kit it is adhesive backed.
Sold in widths of 24 inches and lengths up to 120 inches in size..
Can be removed with out damaging your headlights, tail lights or turn
signals.
The only ATV Tint kit designed to be heat conformed to curved lights!
What ATV Tint Film application tools do you recommend?
Rvinyl recommends the use of an application squeegee which will reduce air
bubbles during installation and aide in heat conforming the tint to your light. By
using a low friction sleeve, you will reduce the chance of scratching your
ATV Tint film during application. Application solutions such as Rapid Clear
will remove any dirt or debris from your lights and Rapid Tac will aide in
the wet application of our tint kits. We strongly recommend the use of these
products to achieve professional results.
What is the difference between Tint and Protection film?
Rvinyl Protection Kits are made from an optically clear 20mil (.020") thick
clear film or a 17mil (.017") thick color film. Rvinyl Non-protective tint
film uses a transparent vinyl which is 3mil (.003")thick. These films are
not made from urethane, do not use optically clear adhesives, reduce light
transmission and provide no light protection.
What is the difference between ATV Tint Film and Pre-Cut
ATV Tint Kits?
Rvinyl.com uses Rtint in the manufacturing of both our Pre-Cut and Universal
Film kits. Universal or non-pre-cut tint is an uncut sheet of our Rtint film
which may be applied to any vehicle's lights. Pre-Cut ATV Tint
kits are pre-cut in the shape of a model specific headlight and come ready
to be applied.
Are your colored films legal on headlights for street use?
Clear Protection films are legal. Our colored tint films may not be legal for
street use on primary lighting. Please check your state or local laws before
application. Our colored films do not produce a blue or red light when lit.
All non-clear films are intended for off-road show car use only.
Can this be applied to my mirrors or windows?
No. Although the film does allow for light transmission, it is not optically
clear and will greatly reduce visibility. It is not intended for these
applications.
ATV Tint Film Light
Transmission Percentages:
Blue Non-Protective Film: 83% Light
Transmission
Clear Lite Protective Film: 100% Light Transmission
Smoke (Dark) Non-Protective Film: 67% Light
Transmission
Smoke (Light) Non-Protective Film: 87% Light
Transmission
Yellow Smoke Non-Protective Film: 86% Light
Transmission
|
|