CATEGORIES

BMW 1 Series Tail Light Tints  

The BMW 1 Series is a range of luxury cars manufactured by BMW starting in 2004. It succeeded the BMW 3 Series Compact and is in the third generation. The first generation was initially produced in hatchback, coupe, and convertible but the couple and convertible were marketed as the 2 Series starting in 2014. The first two generations used rear-wheel drive and the third generation 1 Series switched to front-wheel while offering the all-wheel drive option.


BMW 1 Series Tail Light Tint Covers

Give your BMW 1 Series the upgrade it deserves by installing some new tail light covers. Installing has never been easier with our installation kits. You will save a lot of time since there is no wrapping or spray tinting required! In fact, our tint covers are specifically designed to help the do-it-yourself person set it up with ease. The tint covers are pre-cut to stretch over your tail lights with a minimum of trimming giving your car a brand new feel.

Our tail light tints have air-release, pressure sensitive, and heat-activated adhesives so you get a bubble free result every time. With its clear protective liner on the adhesive side as well as the surface, you won’t get any scuffing or damage during installation.

Make your dreams a reality by giving your car the look that you thought was too expensive. Not anymore. Here at Rvinyl™, we offer the greatest possible selection as you customize and upgrade your ride. That is why if you are unable to find a precut kit already in our inventory, we offer custom tail light design services. If you do choose to have a custom tail light kit designed for you, then we will get to work on it right away. Expect it to be professionally designed and at your door within 7 to 21 business days.

How To Install Your BMW 1 Series Smoked Tail Light Tints

Switch to Rvinyl™ and save hundreds of dollars on vinyl wrap. Our smoked tail light tints will have your vehicle looking stunning and you will be surprised at how little it cost you. Before you get started with your installation, you should plan on how you want to go about it. While you don’t need to use any fluids or tools to install your BMW 1 Series kit, they will make your job easier. That is why we still recommend them for the best possible results. Some of the suggested tools for smoke tail light installation are burnishing tools, squeegees, razors and Rapid Tac fluid which helps to reposition the tint during installation.

Send In Pictures and Show Us Your End Results

Great job on successfully installing your tail light tints and they look amazing. Some might think you are a professional after seeing your vehicle. We believe that the best form of advertisement for us is by delivering amazing results that are customers won’t be able to stop talking about. Our products are of the highest quality, easy to install, and much cheaper than the competition so that you can give your car the look it deserves!

After you are done installing your tail light tints, share your pictures with us for a chance to be featured on our Instagram and YouTube page. If you have any questions, feel free to reach out to us. Someone will get back to you shortly. Follow us on Facebook, Instagram, and YouTube for the latest information on our products.


Featured Categories


Reviews | 4 Reviews

Avg Rating
4.88
Out of 5

Just as described these things rock!!.. Thank you!!
by Jonathan P., San Antonio, TX 4.75

9/20/2021
review-star review-star review-star review-star review-star
For the money you can't go wrong with these Rtints. Pretty easy to install on the 1-Series. I took it a step further and cut out the reverse lights. Its pretty easy to do, just follow the directions.
review image  

Fantastic product I highly recommend
by Peter C, MCLEAN, VA 5.00

8/25/2020
review-star review-star review-star review-star review-star
Ordered rvinyl tint film to wrap my rear reflectors and I'm super happy with the results. Ended up going with the smoked style, instead of pure blackout and it was the right decision, the look sooooooo dope. Great material to work with, installation was very easy but you will need a heat gun for sure. I've seen videos on wrapping cars, so this is a similar process. I ended up cold stretching the material where possible, trimming, then apply heat to finalize the shrink/wrap. Fantastic product I highly recommend, 5/5 stars and will be thinking of smoking my taillights too in the near future...
review image  

Custom Look, Bargain price!
by Tony, M., Staten Island, NY 4.75

11/9/2020
review-star review-star review-star review-star review-star
I got a set of custom tints for my E92. I wanted to have it with the reverse light cut outs, but they explained I needed to apply the film first and then trim them out. It makes sense since you need to heat and stretch it to properly fit. I trimmed them out with a snap blade, careful not to cut my lights. I get compliments everywhere I go in NYC.
review image  

Reviews

4.88 | 4 Reviews