3M™ Wrap Film Series 2080 - Matte Black Metallic

( 4.81 / 5)

Manufacturer Part Number: 2080-M212

Starting at $12.99

Availability: In Stock
Ships within 1 - 2 Business Days

When you want a sophisticated, Matte Black Metallic wrap with a realistic, metal flake? Look no further than 2080 Series Metallic Matte Black vinyl film by 3M™. Made to replace and improve upon 1080 Series Matte Black Metallic films, this wrapping vinyl goes on smooth and stretches twice as much with half the heat. Enjoy the standard sixty-inch width and buy as much or as little as you need since we sell in sheets of 12-inch increments. Wrap your ride inside and out or use it for your devices and even appliances to get a one-of-a-kind look you'll love for years to come.

(4.81 / 5)
Availability: In Stock
Ships within 1 - 2 Business Days
In Stock
Retail: $17.99
Starting at $12.99

    When you want a sophisticated, Matte Black Metallic wrap with a realistic, metal flake? Look no further than 2080 Series Metallic Matte Black vinyl film by 3M™. Made to replace and improve upon 1080 Series Matte Black Metallic films, this wrapping vinyl goes on smooth and stretches twice as much with half the heat. Enjoy the standard sixty-inch width and buy as much or as little as you need since we sell in sheets of 12-inch increments. Wrap your ride inside and out or use it for your devices and even appliances to get a one-of-a-kind look you'll love for years to come.

    3M--2080--M212
    Manufacturer Part Number: 2080-M212
    QTY:

    3M™ 2080 Matte Black Metallic Vinyl Wrap 

    • Flat Black Metallic vinyl wrap finish
    • Air-release, Comply™ adhesives
    • Multi-layer cast, 3.5 mil thick vinyl film
    • 8 Year Life Span
    • Sixty inches wide for easier wrapping

    2080 Matte Black Metallic Vinyl Wrap

    3M™ 2080 Series Matte Black Metallic vinyl wrap films give you a look that you can install on anything and goes on as smooth as butter. 2080 Matte Black Metallic is a Matte film with a soft, Black Metallic color. Apply it on any of the hard, non-porous of your ride from pillars, to fenders to hoods and more. Turn heads and grab attention when you use this premium quality, 3.5 mil thick film with Controltac™ technology that allows you to snap up, re-tack and reposition this film during installation. Oh, and did we mention it features air-release technology too? That's right, no bubbles for you!

    Matte Black Metallic Vinyl Made for You

    3M™ Matte Black Metallic vinyl wraps are made just for you, the DIY installer or enthusiast. No need for any special tools or noxious chemical fluids when you use 2080 Series films. Just follow the instructions that come with your order and you'll be ready to apply this pressure-sensitive, heat-activated vinyl in no time at all. Just clean the surface, add some heat with a hair dryer and squeegee it on. Buy it by the foot and enjoy seamless results because this vinyl comes standard in sixty inch widths. Use it as a wrap, for crafting or even in your Cricut vinyl plotter-cutter!

    2080 Series Matte Wrap Specifications

    • Color: Black Metallic
    • Finish: Matte  
    • Installation Temperature Range: +61°F (+16°C) minimum (air and substrate)
    • End Use Temperature Range: -6F to 225°F (-60°C to 107°C)
    • Adhesives: Pressure-activated with air-release channels
    • Substrate Types: Aluminum, paint
    • Recommended Uses: Automotive, Architectural, Marine (above static water-line), Signage
    • Conformability: Flat, compound, convex and concave curves
    • Thickness: 3.5 mil
    • Application Type: Dry


    Cash Back for Sharing

    We want to share a secret with you: not only are you guys our customers but you're our best advertisers too! That's why we've been offering our $20 Cash Back Rebate for over a decade. Interested? All you have to do is submit 5 to 6 high-quality photos of your 3M™ Matte Black Metallic installed in your vehicle or as part of your crafting project, write up a brief review and send it all in to us. Within a few days we'll process your submissions and issue up to a $20 Cash Back Refund! So, what are you waiting for? Pick up a roll today start turning heads!

    Read More

    Questions about this product? Ask us!

    Number of questions: 1
    Do I need the application fluids to install this. Not doing a whole car. Just a couple parts of a motorcycle. Tank, tail, headlight fairing. If so, which ones, clear, prep, tac, or all?
    Dylan Smed May 13, 2020 3:07 AM
    Answers
    Dylan, Application fluids are definitely recomend for large application areas. I would say you would want to have the Rapid Prep to really prepare the surface for wrapping. You could also use the squeegee with felt sleeve to help from marring the film during application. Rapid clear is really meant for cleaning and conditioning the film, but its up to you. If you wand wash your bike regularly, I imagine that for small wraps it would not be an issue.
    Rvinyl Product Guru May 15, 2020 9:14 AM