Rtrim™ Precut Carbon Fiber Pillar Kit
- Upgrade to the edgy, modern look of Carbon Fiber
- Removable, semi-permanent adhesives won't cause damage
- Precut to the dimensions of your Ford Tempo 1990-1994's pillar posts
- Simple peel and stick installation
Rtrim™ Carbon Fiber Pillar Trim Kits: Easily Transform Your Ride
Rtrim Carbon Fiber Pillar Trim Kits are a unique aftermarket automotive accessory designed to add a touch of luxury and style to your vehicle. These kits consist of a set of self-adhesive carbon fiber vinyl trim pieces that are applied to the pillars of your car's doors, windshield, and rear window. The carbon fiber vinyl used in these kits is of the highest quality, and it provides a sleek, modern look that is sure to turn heads.
Carbon Fiber Finish: Style and Perfomance Meet
Carbon fiber is a material that is widely used in the aerospace and automotive industries due to its lightweight, strength, and durability. The finish of the Rtrim Carbon Fiber Pillar Trim Kits is made to replicate the look of that real carbon fiber. The carbon fiber finish is achieved by layering a thin sheet of carbon fiber over a resin matrix, which is then cured under heat and pressure. This process produces a finish that is lightweight, scratch-resistant, and UV-protected, ensuring that it will maintain its appearance for years to come. Although our carbon fiber is made from a multi-cast vinyl film, it is almost indistinguishable from the real thing.
Pillar Trim Kits: Protection with Good Looks
The Rtrim Carbon Fiber Pillar Trim Kits not only enhance the look of your vehicle but also provide added protection. The carbon fiber material used in these kits is exceptionally durable and can protect your car's pillars from scratches, dings, and other forms of damage. The carbon fiber finish is also resistant to fading and discoloration, ensuring that your vehicle maintains its sleek appearance for years to come.
Get Do-It-Yourself Savings with Rtrim
One of the most significant advantages of the Rtrim Carbon Fiber Pillar Trim Kits is that they can be easily installed at home, which can save you a significant amount of money. Unlike other aftermarket automotive accessories, which require professional installation, these kits come with detailed instructions that guide you through the installation process step-by-step. With some patience and a little bit of time, anyone can install these kits and enjoy the benefits of a custom look without having to pay for professional installation.
- Designed to wrap around the pillars of your vehicle.
- The material is thin and flexible, allowing for seamless application that perfectly conforms to the curves and contours of your vehicle's pillars.
- Equipped with an air-release adhesive, the trim is easy to apply without any air bubbles or wrinkles.
- The trim provides an extra layer of protection against scratches, dents, and other damages that your pillars may encounter.
- The product is an affordable alternative to traditional hard plastic pillar covers, allowing you to achieve a similar look at a fraction of the cost.
Applying Your Precut Pillar Trim
Each pillar post kit comes ready to install and won't fade or come unstuck for years to come. Applying the kit is easy, but we recommend that you also add application tools and fluids to your order. Use a squeegee to reduce air bubbles, Rapid Prep to remove dirt or debris from your pillar post surface, 3M™ Primer Pen to help your pillar post kit stick to the pillar post better and more quickly, and Seal-It Pens to seal the edges of your pillar post trim.
- Squeegee: This will reduce air bubbles and aide in heat conforming the decal and the low friction sleeves prevents scratches.
- Rapid Prep: Removes any dirt or debris from your pillar post surface
- 3M™ Primer Pen: We cannot recommend these highly enough. Using a primer will help your pillar post kit to stick to the pillar post better and more quickly.
- Seal-It Pens: These are used to seal the edges of your pillar post trim.
The process of applying the Rtrim Carbon Fiber Pillar Trim Kits is relatively straightforward and can be completed in a few easy steps. Here's a step-by-step guide on how to apply these kits to your vehicle:
Step 1: Clean the surface thoroughly Before applying the trim pieces, ensure that the surface is clean and free of any dirt or debris. You can use soap and water or a cleaning solution specifically designed for automotive surfaces to clean the area thoroughly.
Step 2: Measure and cut the trim pieces Using a measuring tape and a sharp utility knife, measure and cut the trim pieces to fit the surface area of your car's pillars. It's important to ensure that the trim pieces fit precisely, so take your time when measuring and cutting.
Step 3: Apply the adhesive Once the trim pieces are cut to the correct size, remove the protective backing from the adhesive and carefully apply the trim pieces to the surface. Use a squeegee or a credit card to smooth out any bubbles or wrinkles.
Step 4: Trim any excess material After the trim pieces have been applied, use a utility knife to trim any excess material that may be hanging over the edge.
Step 5: Allow the adhesive to dry Once you've applied the trim pieces, allow the adhesive to dry completely before using your vehicle. This usually takes about 24-48 hours, depending on the weather conditions.
Invest in Your Vehicle
Upgrade your vehicle's appearance with Carbon Fiber Pillar Kits. Don't settle for a dull and outdated vehicle. Order today and experience the quality, durability, and affordability of these Carbon Fiber Trim Kits.