Pontiac Vehicle Wraps

The Pontiac marque was officially retired on October 31, 2010 but that doesn't mean that there aren't any number of G6s and Grand Ams out there needing an upgrade or cosmetic updates. Vehicle wraps are the perfect solution for restyling an older vehicle and color change wraps are an affordable alternative to aftermarket paint jobs so browse our complete selection of 3M™ and Rwraps™ vinyl wrap films today and get your Pontiac looking as good as the day it first drove off the lot.

How Much Vinyl Do You Need?

The best way to figure out how much wrap film your Pontiac will need is by multiplying the length of your ride by three (one for each side and the roof, hood and trunk) and then adding  an extra 10 feet for bumpers, rocker panels, spoilers and mistakes. In general, you'll need a minimum of ten yards by sixty inches for a complete wrap of any vehicle.

Please note: Pontiac vehicle wraps are meant for application only on OEM paint jobs.

Pontiac Vehicle Wraps Specs

Pontiac DIY vehicle wraps are made to be used it right off the roll. You don't need to buy any additional glues or overlaminate. These ultra cast films are designed not to discolor or deform even when applied around the most extreme of curves unlike calendered sign vinyl. Enjoy the convenience and quality of our professional grade, wrap films and get to wrapping your ride today!

  • Cast vinyl films
  • More than 200 colors and finishes
  • Pressure-sensitive adhesives
  • Air-release channels for bubble-free results
  • Sold by the foot in widths of 12, 24 60 inch rolls (3M™ Series 1080 is only available in 60-inch wide format)
  • Semi-permanent and removable

Get Cash to Wrap Your Pontiac

When you wrap your Pontiac with Rwraps™ or Series 1080 vinyl wraps don't forget to take great pics of your work because when you send 5 or 6 high-quality photos into us you can get cash back! Submit your  pictures and a review we'll give you a refund of up to $20 plus we'll post your pics to our site so you get bragging rights along with a little cash back.

Post-Heating Your Pontiac Vehicle Wrap

If You're Not Post-Heating Don't Bother Wrapping

If you've been wrapping but you haven't been post-heating your Pontiac vehicle wraps, you've been doing it wrong. In fact, if you're not post-heating you shouldn't even bother installing a wrap in the first place since the results are going to get worse with each passing day. Don't waste your time and expensive wrap film by forgetting to complete the most important step.


Heat Gun Tips for You

Heat is a Must for Wraps

You may not want to admit it but a heat gun is the one tool you'll need if you want to wrap your Pontiac. Since all wrap vinyl has a heat-activated memory you'll need to use a heat gun if you want the film to perform. From removing wrinkles to conforming it around corners, heat is the only thing that activates vinyl film memory. 


Cold Pre-Stretching: Pro-Tricks for DIY Wrappers

Vehicle Wraps that Last

Want to know the one secret that separates the pros from the amateurs? It's cold pre-stretching vinyl vehicle wraps. Without cold pre-stretching you run the risk of your wrap shrinking back up on itself and pulling away from edges and corners. So, why not learn how it's done. Read on and learn more now!


Featured Categories