Saab Vehicle Wraps

The Saab brand is officially dead as of 2016 but that doesn't mean that there aren't any number of Saab 9-3s out there needing a little TLC. Vehicle wraps are the perfect solution for rehabbing an older vehicle and complete color change wraps are an affordable alternative to aftermarket paint jobs.

How Much Vinyl Does Your Saab Need?

The best way to figure out how much vinyl your Saab will need is by using this simple formula. Take the length of your vehicle and multiply it by three (one for each side and the roof, hood and trunk) plus an extra 5 to 10 feet for bumpers, rocker panels, spoilers and mistakes. In general, you'll need a minimum of ten yards by sixty inches for a complete wrap of any vehicle.

Please note: Saab vehicle wraps are meant for application only on OEM paint jobs.

Saab Vehicle Wraps Specs

Saab DIY vehicle wraps are made to be used it right out of the box. You don't need to buy any additional glues or overlaminate. These super cast films are designed not to discolor or deform even when applied around the most extreme of curves unlike calendered sign vinyl. Enjoy the convenience and quality of our professional grade, wrap films and get to wrapping your ride today!

  • Cast vinyl films
  • More than 200 colors and finishes
  • Pressure-sensitive adhesives
  • Air-release channels for bubble-free results
  • Sold by the foot in widths of 12, 24 60 inch rolls (3M™ Series 1080 is only available in 60-inch wide format)
  • Semi-permanent and removable

Get Cash to Wrap Your Saab

When you wrap your Saab with Rwraps™ or Series 1080 vinyl wraps don't forget to take great pics of your work because when you send 5 or 6 high-quality photos into us you can get cash back! That's right when you submit your pictures and a review we'll give you a refund of up to $20 plus we'll post your pics to our site so you get a little fame with your fortune too!

The Importance of Post-Heating Your Saab Vehicle Wrap

Without Post-Heat, Your Wrap Is Cooked

If you've been wrapping corners, edges and channels but you haven't been post-heating your Saab vehicle wraps, you've been doing it wrong. Whenever you're wrapping anything with curves, you need to use this technique if you want the film to perform and stay in place. Read more and learn how now.


Heat Gun Tips for DIY Installers

Using a Heat Gun for the Best Results

You may not want to admit it but a heat gun is the one tool you'll need if you want to wrap your Saab. Since all wrap vinyl has a heat-activated memory you'll need to use a heat gun if you want the film to perform.


The Miracle of Cold Pre-Stretching

Vehicle Wraps that Last

Want to know the one secret that separates the pros from the amateurs? It's cold pre-stretching vinyl vehicle wraps. Without cold pre-stretching you run the risk of your wrap shrinking back up on itself and pulling away from edges and corners. So, why not learn how it's done. Read on and learn more now!


Featured Categories