Vinyl vehicle wraps are the ideal way to change the color of your Acura without the expense or mess of an aftermarket paint job. What's more, since most non-OEM paint jobs aren't allowed to cure for the same amount of time nor do they use the same quality of paints or clear coats, they tend to chip and peel quite easily. Whether you're looking to restore your Acura Integra's exterior with a color change 3M™ vinyl wrap or you want to add the look of an Rwraps™ 4D Carbon Fiber hood to your TL, vinyl is the sensible choice: not only will it far outlast an aftermarket spray job but you can get one-of-a-kind finishes and colors with vinyl vehicle wraps you can't get with paint.
Whether you've been thinking of a complete color change or just want to wrap your hood, trunk, fenders or mirrors, we've got the right vinyl wrap in the right size for you. Both our Rwraps™ and 3M™ vehicle wraps are meant to be applied over you factory paint finish and are removable so you can take them off without damaging the underlying surface.
So what are your options for wrapping your Acura? You might be excited to know that you don't have to commit to wrapping your whole MDX from bumper to bumper. Instead, you can focus on individual panels to protect against specific dangers or to achieve a particular look. By applying your vehicle wrap one panel at a time you have complete control over how much of your car is covered.
Here's a look at some different options you have when it comes to applying a vehicle wrap to your car:
Please note: Acura vehicle wraps are meant for application only on OEM paint jobs. They are not intended for aftermarket paint jobs as this will not have been cured to the same level as factory paint jobs. Also, when choosing your car wrap, carefully measure the area or component to be wrapped and select the appropriate amount of material needed, remembering to factor in an overhang that will be trimmed after application.
All of our Acura vehicle wraps are made for use it right out of the box. And, because they're engineered with dual color layers for dimensional stability and durability, you can depend on them not to discolor or deform even around the most extreme of curves. Enjoy the convenience and quality of our pro-grade, DIY ready films and get to wrapping.
Whether you want to wrap your Acura SUV's hood with Series 1080 Flip film, your all new NSX in a Matte Metallic film or want to add the steam punk of Engine Turn vinyl to your Acura RL, we've got just the thing you're looking for. And, since there's no better advertising than a satisfied customer, we're excited to offer our $20 Cash Back Photo Rebate program to you. Just wrap your Acura with any of our vinyl films, take 5 or 6 photos and write up a quick review of your experience. We'll issue you up to a $20 Cash Back refund and then post your review and pics to our site and blog. What could be better? So, hurry up and pick up a wrap kit for your Acura today!
Proper cleaning and preparation of your installation area as well as your vehicle itself are often overlooked by DIY installers but are absolute musts if you want to get good results. Check out today's post and learn how to clean your ride like a pro and avoid wasting costly vinyl wrap film.
Post-heating is one of the most important yet forgotten steps by DIY installers. Whenever you're wrapping anything with a curve, corners or creases, you need to use this technique if you want the film to perform and give you professional-looking results.
Most DIY wrap installers try to do without this tool but if there's one thing you need to wrap it's a heat gun. Still, it's never a simple as buying a heat gun and turning it on. Check out our article here and learn all the tricks of the trade/
Want to know the one secret that separates the pros from the amateurs? It's the German-developed technique of cold pre-stretching vinyl vehicle wraps. Check out today's post and up your wrap game.
Acura Dash Kits
Acura Window Tint
Acura Headlight Tint Covers